Fixed it for you.jwhouk wrote:The one section can only be properly read with the following playing in the background...
Aluminium Angel Comments Section
Moderators: Bookworm, starkruzr, MrFireDragon, PrettyPrincess, Wapsi
- DinkyInky
- Posts: 2382
- Joined: Tue Jul 31, 2012 9:38 am
- Location: Where there's more than Corn.
- Contact:
Re: Aluminium Angel Comments Section
Yanno how some people have Angels/Devils for a conscience? I have a Dark Elf ShadowKnight and a Half Elf Ranger for mine. The really bad part is when they agree on something.
Aphyon chu kissa whol l'jaed.
--Safyr Drathmir
Aphyon chu kissa whol l'jaed.
--Safyr Drathmir
Re: Aluminium Angel Comments Section
"... like a rabid Care Bear." Lady, you are delightfully evil!DinkyInky wrote:Fixed it for you.
- jwhouk
- Posts: 6053
- Joined: Wed Aug 01, 2012 7:58 am
- Location: The Valley of the Sun, Arizona
- Contact:
Re: Aluminium Angel Comments Section
I have to watch it. My family's from Barnard's Castle, which is a few well thrown bagpipes from Scotland.
"Character is what you are in the dark." - D.L. Moody
"You should never run from the voices in your head. That's how you give them power." - Jin
"You should never run from the voices in your head. That's how you give them power." - Jin
- Just Old Al
- Posts: 1684
- Joined: Tue Jul 31, 2012 4:43 am
- Location: Wilderness of Massachusetts
- Contact:
Re: Aluminium Angel Comments Section
"How do you get an Englishman out of a tree? Cut the noose...."Dave wrote:"... like a rabid Care Bear." Lady, you are delightfully evil!DinkyInky wrote:Fixed it for you.
I just hyperventilated and fell out of my chair.
"The Empire was founded on cups of tea, mate, and if you think I am going to war without one you are sadly mistaken."
- lake_wrangler
- Posts: 4300
- Joined: Sun Aug 05, 2012 8:16 am
- Location: Laval, Québec, Canada
Re: Aluminium Angel Comments Section
Personally, while I am somewhat mechanically inclined, inasmuch as if I know how to do a procedure, and have the proper tools, I can accomplish it, I am, sadly, somewhat car-knowledge poor. Yet in spite of that, I too, enjoy this little story immensely. I believe the reason for that is that there is a sufficient mix of mechanics and people story together to make it interesting to even those who do not grasp the finer details of the mechanical parts.chicgeek wrote:On a lighter note, I am the least mechanically inclined person you'd hope to meet. The engineering jargon is so much babble to me. And I still thoroughly enjoyed the story.
Incidentally, this story, along with others that "starred" Clara, had me look up information on Land Rover vehicles on the internet... I have to admit that while the front end is evidently different, the side panels and overall look of some of the Land Rovers remind me somewhat of the look of some models of the International Harvester Scout vehicles... (What can I say: we can't all be "classically trained"... ) It's not all the models, of course: I'm talking about the shorter wheelbase ones, for LR, and mostly the earlier Scout models. Compare an LR Image search with a IH Scout image search, to see what I mean. (As long as you overlook the sloping roofline on the LR models, of course... and I did say they "somewhat" remind me of the Scouts...)
I owned a Scout, for a few months, but could not afford the work it needed to get it certified and plated, so I had to sell it. I would have loved to be able to keep it. I also was interested in a 1972 Ford Bronco (i.e. first generation), but it was jacked up, and the owner said that the driveshaft had a tendency to pull out, if one was not careful. I was doing pizza delivery, at the time, so I could not take the chance of that happening while working... I was also enamoured by the second generation Broncos, long before I fell in love with the GMC Suburbans (of which I was only able to purchase one in 2011, after years of yearning...) I also found the Centurion Bronco conversion (one is pictured on the Bronco's Wikipedia page), of a Crew Cab pickup into a Bronco-like extended truck similar to the Suburbans to be quite interesting. But those were done as custom jobs by a company that charged quite a bit for them (and I'm sure they were worth it), before Ford decided to try the Excursion and, later, the Expedition EL (Expedition Max, in Canada, because, God forbid, someone might confuse the name with that of the Acura El... )
By the way, I'm starting to think that we will need a cast document, with the same kind of information as jwhouk did for the WS cast... For quick reference and backstory (as much as the fanfics have told us, no more), to help jog peoples' memory, as they keep reading newer and newer fanfics, with the older fanfics getting further in the back of the mind... (It's easier to read a quick reference on a characer, than to have to re-read all the fanfics to try to remember what that character has done in the past...)
- AmriloJim
- Posts: 1190
- Joined: Sat Aug 04, 2012 10:47 pm
- Location: 35ºN 101ºW (for the GPS-challenged, that's Amarillo TX)
- Contact:
Re: Aluminium Angel Comments Section
Agreed... I've tried searching for the proper pronunciation of the middle name which Sterling uses as her surname, to no avail.lake_wrangler wrote:By the way, I'm starting to think that we will need a cast document, with the same kind of information as jwhouk did for the WS cast... For quick reference and backstory (as much as the fanfics have told us, no more), to help jog peoples' memory, as they keep reading newer and newer fanfics, with the older fanfics getting further in the back of the mind... (It's easier to read a quick reference on a characer, than to have to re-read all the fanfics to try to remember what that character has done in the past...)
- lake_wrangler
- Posts: 4300
- Joined: Sun Aug 05, 2012 8:16 am
- Location: Laval, Québec, Canada
Re: Aluminium Angel Comments Section
I think it sounded something like Dev-naught, or something like that...AmriloJim wrote:Agreed... I've tried searching for the proper pronunciation of the middle name which Sterling uses as her surname, to no avail.lake_wrangler wrote:By the way, I'm starting to think that we will need a cast document, with the same kind of information as jwhouk did for the WS cast... For quick reference and backstory (as much as the fanfics have told us, no more), to help jog peoples' memory, as they keep reading newer and newer fanfics, with the older fanfics getting further in the back of the mind... (It's easier to read a quick reference on a characer, than to have to re-read all the fanfics to try to remember what that character has done in the past...)
I expect to be corrected forthwith and post-haste, naturally...
-
- Posts: 609
- Joined: Tue Jul 31, 2012 4:45 pm
Re: Aluminium Angel Comments Section
You've got it precisely correct, actually. It's from the Gaelic, which is always pronounced very differently from how it is spelled due to an alphabetical translation which is... the best one can do considering it was primarily a spoken rather than written language.lake_wrangler wrote:I think it sounded something like Dev-naught, or something like that...AmriloJim wrote:Agreed... I've tried searching for the proper pronunciation of the middle name which Sterling uses as her surname, to no avail.lake_wrangler wrote:By the way, I'm starting to think that we will need a cast document, with the same kind of information as jwhouk did for the WS cast... For quick reference and backstory (as much as the fanfics have told us, no more), to help jog peoples' memory, as they keep reading newer and newer fanfics, with the older fanfics getting further in the back of the mind... (It's easier to read a quick reference on a characer, than to have to re-read all the fanfics to try to remember what that character has done in the past...)
I expect to be corrected forthwith and post-haste, naturally...
Re: Aluminium Angel Comments Section
Thirded . . . I could use such for the piece I'm trying to write.lake_wrangler wrote:I think it sounded something like Dev-naught, or something like that... . . .AmriloJim wrote:Agreed... I've tried searching for the proper pronunciation of the middle name which Sterling uses as her surname, to no avail.lake_wrangler wrote:By the way, I'm starting to think that we will need a cast document, with the same kind of information as jwhouk did for the WS cast... For quick reference and backstory (as much as the fanfics have told us, no more), to help jog peoples' memory, as they keep reading newer and newer fanfics, with the older fanfics getting further in the back of the mind... (It's easier to read a quick reference on a characer, than to have to re-read all the fanfics to try to remember what that character has done in the past...)
--FreeFlier
- lake_wrangler
- Posts: 4300
- Joined: Sun Aug 05, 2012 8:16 am
- Location: Laval, Québec, Canada
Re: Aluminium Angel Comments Section
Ironically, while I remember (apparently) how to pronounce it, I currently forget how it's written...ShneekeyTheLost wrote:You've got it precisely correct, actually. It's from the Gaelic, which is always pronounced very differently from how it is spelled due to an alphabetical translation which is... the best one can do considering it was primarily a spoken rather than written language.lake_wrangler wrote:I think it sounded something like Dev-naught, or something like that...AmriloJim wrote:Agreed... I've tried searching for the proper pronunciation of the middle name which Sterling uses as her surname, to no avail.
I expect to be corrected forthwith and post-haste, naturally...
Dem...something... (though I'm pretty sure it ends with a 't'...)
- GlytchMeister
- Posts: 3733
- Joined: Wed Oct 16, 2013 2:52 pm
- Location: Central Illinois
- Contact:
Re: Aluminium Angel Comments Section
Yana has a friend who put up a Wapsi Fanfic Wiki. The various authors are, albeit somewhat gradually, working on filling it with the information it would and should contain.
Trouble is, it's a huge project. We have produced a rather huge volume of work, and life has been getting in the way somethin' fierce.
Still, it's a work in progress, even if progress is flowing a bit more like molasses than we would probably like.
Trouble is, it's a huge project. We have produced a rather huge volume of work, and life has been getting in the way somethin' fierce.
Still, it's a work in progress, even if progress is flowing a bit more like molasses than we would probably like.
He's mister GlytchMeister, he's mister code
He's mister exploiter, he's mister ones and zeros
They call me GlytchMeister, whatever I touch
Starts to glitch in my clutch!
I'm too much!
He's mister exploiter, he's mister ones and zeros
They call me GlytchMeister, whatever I touch
Starts to glitch in my clutch!
I'm too much!
Re: Aluminium Angel Comments Section
AmriloJim wrote:Agreed... I've tried searching for the proper pronunciation of the middle name which Sterling uses as her surname, to no avail.
lake_wrangler wrote:I think it sounded something like Dev-naught, or something like that...
I expect to be corrected forthwith and post-haste, naturally...
ShneekeyTheLost wrote:You've got it precisely correct, actually. It's from the Gaelic, which is always pronounced very differently from how it is spelled due to an alphabetical translation which is... the best one can do considering it was primarily a spoken rather than written language.
Damhaight? (Probability of being reasonably correct approximately 50%)lake_wrangler wrote:Ironically, while I remember (apparently) how to pronounce it, I currently forget how it's written...
Dem...something... (though I'm pretty sure it ends with a 't'...)
--FreeFlier
- DinkyInky
- Posts: 2382
- Joined: Tue Jul 31, 2012 9:38 am
- Location: Where there's more than Corn.
- Contact:
Re: Aluminium Angel Comments Section
Sterling Damhnait.FreeFlier wrote:AmriloJim wrote:Agreed... I've tried searching for the proper pronunciation of the middle name which Sterling uses as her surname, to no avail.lake_wrangler wrote:I think it sounded something like Dev-naught, or something like that...
I expect to be corrected forthwith and post-haste, naturally...ShneekeyTheLost wrote:You've got it precisely correct, actually. It's from the Gaelic, which is always pronounced very differently from how it is spelled due to an alphabetical translation which is... the best one can do considering it was primarily a spoken rather than written language.Damhaight? (Probability of being reasonably correct approximately 50%)lake_wrangler wrote:Ironically, while I remember (apparently) how to pronounce it, I currently forget how it's written...
Dem...something... (though I'm pretty sure it ends with a 't'...)
--FreeFlier
Yanno how some people have Angels/Devils for a conscience? I have a Dark Elf ShadowKnight and a Half Elf Ranger for mine. The really bad part is when they agree on something.
Aphyon chu kissa whol l'jaed.
--Safyr Drathmir
Aphyon chu kissa whol l'jaed.
--Safyr Drathmir
Re: Aluminium Angel Comments Section
Is that a valid term? I've always seen it as "trompe l'oeuil".The sides were a trompe d'oeuil picture
- Just Old Al
- Posts: 1684
- Joined: Tue Jul 31, 2012 4:43 am
- Location: Wilderness of Massachusetts
- Contact:
Re: Aluminium Angel Comments Section
You may be right - I derived it freom the French instead of looking it up. I will revise.Dave wrote:Is that a valid term? I've always seen it as "trompe l'oeuil".The sides were a trompe d'oeuil picture
I am, however, browned off that I did not get called on something.
“Ye dinna ken why ye’ve angered me! A nod’s as good as a wink to a blind horse, eh?”
“Leave my wife out of this."
Geeze...
"The Empire was founded on cups of tea, mate, and if you think I am going to war without one you are sadly mistaken."
- jwhouk
- Posts: 6053
- Joined: Wed Aug 01, 2012 7:58 am
- Location: The Valley of the Sun, Arizona
- Contact:
Re: Aluminium Angel Comments Section
There appears to be something slightly out of order in the latest installment - did time pass between "Now, out with you all!" and Ari and Sterling doing the checklist?
"Character is what you are in the dark." - D.L. Moody
"You should never run from the voices in your head. That's how you give them power." - Jin
"You should never run from the voices in your head. That's how you give them power." - Jin
- Just Old Al
- Posts: 1684
- Joined: Tue Jul 31, 2012 4:43 am
- Location: Wilderness of Massachusetts
- Contact:
Re: Aluminium Angel Comments Section
Yes, one was the afternoon of the day before and the checklist was the next morning. That bit's a bit clumsy.jwhouk wrote:There appears to be something slightly out of order in the latest installment - did time pass between "Now, out with you all!" and Ari and Sterling doing the checklist?
"The Empire was founded on cups of tea, mate, and if you think I am going to war without one you are sadly mistaken."
- AmriloJim
- Posts: 1190
- Joined: Sat Aug 04, 2012 10:47 pm
- Location: 35ºN 101ºW (for the GPS-challenged, that's Amarillo TX)
- Contact:
Re: Aluminium Angel Comments Section
Just add a 'graf that tells of one of the co-conspirators rolling in to the plant two hours early, only to find the other waiting impatiently.
- Just Old Al
- Posts: 1684
- Joined: Tue Jul 31, 2012 4:43 am
- Location: Wilderness of Massachusetts
- Contact:
Re: Aluminium Angel Comments Section
Quite true. Good point, and good solution.AmriloJim wrote:Just add a 'graf that tells of one of the co-conspirators rolling in to the plant two hours early, only to find the other waiting impatiently.
"The Empire was founded on cups of tea, mate, and if you think I am going to war without one you are sadly mistaken."
Re: Aluminium Angel Comments Section
Agreed... well spliced!
And, I agree with Al's decision to wait until the next day. All too often, I've "finished" something difficult, looked it over and found nothing wrong, and pushed ahead to test it... only to have something go PFFFT and let some of the magic smoke out. I'd missed seeing the fault due to a combination of over-eagerness and fatigue (sort of a tech version of buck fever, perhaps?).
Getting a good night's sleep before doing the final look-over and running the test, is usually a very good idea. Fairly often I find myself waking up at four in the morning with an "Oh sh*t, you idiot!" realization, where the back-side of my brain throws up an image into my awareness, with my big fat mistake glowing in neon colors. The workings of the not-entirely-conscious parts of the mind are mysterious, but I've come to respect them a lot (mostly by being slapped around by myself whenever I don't!)
And, I agree with Al's decision to wait until the next day. All too often, I've "finished" something difficult, looked it over and found nothing wrong, and pushed ahead to test it... only to have something go PFFFT and let some of the magic smoke out. I'd missed seeing the fault due to a combination of over-eagerness and fatigue (sort of a tech version of buck fever, perhaps?).
Getting a good night's sleep before doing the final look-over and running the test, is usually a very good idea. Fairly often I find myself waking up at four in the morning with an "Oh sh*t, you idiot!" realization, where the back-side of my brain throws up an image into my awareness, with my big fat mistake glowing in neon colors. The workings of the not-entirely-conscious parts of the mind are mysterious, but I've come to respect them a lot (mostly by being slapped around by myself whenever I don't!)